POLINI SMARTMAP
Direct mapping into the original ECU.
Polini Motori presents Polini SmartMap, the new programmer that allows professional, safe, and fully reversible intervention on the scooter’s original ECU.
SmartMap uploads a Polini map directly into the stock ECU, preserving the vehicle’s original electronics without any permanent installation.
A solution designed to update engine management in a precise and calibrated way, with the option to restore the original configuration at any time.
SmartMap Features
- Works on the original ECU
- No additional component to be installed
- Backup of the original map
- Maps developed and tested by Polini
- Integrated diagnostic functions
- Configurable via App for Apple, Android, and Huawei devices
A simple and user-friendly system, designed to avoid the installation of permanent wiring harnesses or additional control units.
Polini Maps
The available maps are dedicated to specific scooter models and vary depending on different engine setups: More open intake, Exhaust system (original or racing) and where applicable, increased displacement
Continuously updated platform
The selection of the map is guided by consulting the compatibility table.
Applications are continuously updated: supported scooter models and dedicated engine maps may increase over time.
The table must always be consulted to verify supported models, available maps, and any operational notes.
SmartMap is not just a product: it is an evolving platform.
Polini Variator: always compatible
The Polini Variator can always be installed: before or after SmartMap and with all available mappings, depending on the specific application.
Dedicated Wiring
A dedicated wiring harness is required for connection to the vehicle’s diagnostic port (sold separately).
Each SmartMap device is exclusively linked to the frame and engine of a single scooter.
Polini SmartMap: new models available
| Brand | Model | Euro | Year | Engine type and wiring | Map 1 | Map 2 | Map 3 | Map 4 | Note |
|---|---|---|---|---|---|---|---|---|---|
| Aprilia | SR GT 400 | 5+ | 26 | engine: MF11M wiring OBD2 171.0207 |
Original map |
increase in fuel flow | racing muffler | ||
| Honda | SH 350i ABS Sporty | e5+ | 25 | engine: NF11E wiring OBD2 171.0207 |
Original map |
Original muffler and sleeve/upgraded air filter |
Racing muffler and sleeve/upgraded air filter |
– | Disconnect the 2 lamda sensors |
| Honda | SH 350i ABS Top Box | ||||||||
| Honda | SH 350i ABS | ||||||||
| Piaggio | Beverly 300 | e3 | 16-20 | wiring OBD 171.0208 | Original map |
Cylinder kit | Cylinder kit, racing muffler |
||
| Piaggio | Beverly 300 | ||||||||
| Piaggio | Beverly 300 | e5 | 21-24 | wiring OBD2 171.0207 | Original map |
Cylinder kit | Cylinder kit, racing muffler |
||
| Piaggio | Beverly 300 HPE | ||||||||
| Piaggio | Liberty | e5+ | 25/26 | wiring 171.0207 | Original map |
Cylinder kit,intake manifold,oversized air filter, racing muffler |
Cylinder kit,intake manifold,oversized air filter, racing muffler |
Cylinder kit,intake manifold,oversized air filter, racing muffler |
|
| Piaggio | MP3 300 | 5 | 21/24 | wiring OBD2 171.0207 | Original map |
Cylinder kit | Cylinder kit, racing muffler |
||
| Piaggio | MP3 300 HPE | ||||||||
| Piaggio | MP3 310 sport | 5+ | 25/26 | wiring OBD2 171.0207 | Original map |
racing muffler | |||
| Piaggio | MP3 310 HPE | ||||||||
| Vespa | Primavera Turing 125 | e4 | 17-21 | wiring 171.0208 | Original map |
Cylinder kit | Cylinder kit, muffler and sleeve, upgraded air filter |
Cylinder kit, muffler, cam, and sleeve, upgraded air filter |
|
| Vespa | Primavera S 125 | ||||||||
| Vespa | Primavera Rosso 125 | ||||||||
| Vespa | Primavera Pic Nic 125 | e5 | 21-23 | engine:MD11M wiring OBD2 171.0207 |
Original map |
Cylinder kit | Cylinder kit, muffler and cam |
Cylinder kit, muffler, cam, and sleeve, upgraded air filter |
|
| Vespa | Primavera | ||||||||
| Vespa | Sprint | ||||||||
| Vespa | Sprint 125 | e5+ | 25-26 | wiring OBD2 171.0207 | Original map |
Cylinder kit/camshaft/intake manifold/oversized air filter and original muffler |
Cylinder kit/camshaft/intake manifold/oversized air filter and racing muffler |
Cylinder kit/oversized intake manifold/air filter and racing exhaust |
|
| Vespa | Primavera 125 | ||||||||
| Vespa | Primavera 150 | e5+ | 26 | engine MD24N wiring OBD2 171.0207 |
Original map |
Cylinder Kit | Cylinder kit and racing muffler |
||
| Vespa | Primavera tech | ||||||||
| Vespa | Sprint 150 | ||||||||
| Vespa | GTS 300 Super Sport | e4 | 16-20 | engine M4A36M/MA33M wiring OBD2 171.0207 |
Original map |
Cylinder Kit and racing muffler |
Cylinder kit, racing muffler and sleeve |
||
| Vespa | GTS 300 Hpe | ||||||||
| Vespa | Super Hpe | ||||||||
| Vespa | GTS 300 Supertech Hpe | e5 | 21-24 | engine: MD31M wiring OBD2 171.0207 |
Original map |
Cylinder kit and original muffler |
Cylinder Kit and racing muffler |
Cylinder kit, racing muffler and sleeve/upgraded air filter |
Disconnect the lamda sensor |
| Vespa | GTS 300 Super Sport Hpe | ||||||||
| Vespa | GTS 300 Hpe | ||||||||
| Vespa | GTS 300 Super Hpe | ||||||||
| Vespa | GTS 300 Supertech Hpe 75th | ||||||||
| Vespa | GTS 300 Touring Hpe | ||||||||
| Vespa | GTS 300 Super Racing Sixties Hpe | ||||||||
| Vespa | GTS 300 | 23-24 | |||||||
| Vespa | GTS 300 Super | ||||||||
| Vespa | GTS 300 Super Tech | ||||||||
| Vespa | GTS 300 Super Sport | ||||||||
| Vespa | GTS 310 Super Tech | e5+ | 25 | engine: MD38M wiring OBD2 171.0207 |
Original map |
Racing muffler | Original muffler and sleeve/upgraded air filter |
Racing muffler and sleeve/upgraded air filter |
Disconnect the 2 lamda sensors |
| Vespa | GTS 310 Super Sport | ||||||||
| Vespa | GTS 310 Super | ||||||||
| Vespa | GTS 310 | ||||||||
| Vespa | GTV 300 | e5 | 23-24 | wiring OBD2 171.0207 | Original map |
Racing muffler | Cylinder Kit and racing muffler |
Cylinder kit, racing muffler and sleeve |
|
| Vespa | GTV 300 Hpe |